# Contactless instrument for automated measurement of viscosity, density and surface tension of coating formulations in a robotic workflow

- **Source:** TED · `801966-2026`
- **Buyer:** Danmarks Tekniske Universitet - DTU
- **Published:** 2026-11-18
- **Deadline:** —
- **Estimated value:** —
- **CPV codes:** 38000000, 38300000, 38400000, 38420000, 38425000, 38425200, 38425700, 38425800, 38428000, 38540000
- **Place-of-performance NUTS:** DK012, DNK
- **Buyer-address NUTS:** DK012
- **Notice type:** veat / 25

## Procedure details

Source lists may span several lots; list positions do not establish relationships.

### Procedure Types

- neg-wo-call

## Description

DTU Chemical and Biochemical Engineering is acquiring one (1) laboratory instrument for the automated determination of dynamic viscosity, density and surface tension of liquid coating formulations (paints, lacquers, clear coats and their liquid precursors). The instrument will be integrated as a measuring station in DTU’s existing robotic, fully automated workflow, in which coating formulations are dispensed, mixed and characterised without manual intervention. The instrument must fulfil all of the following requirements: (1) Contactless measurement: viscosity, density and surface tension must be determined without any part of the instrument entering or touching the sample. (2) In-container measurement: the measurement must take place directly in the original mixing cups used in the workflow, without transferring, sub-sampling, diluting or otherwise preparing the sample, so that the cup is the only item in contact with the sample and no cleaning is required between measurements. (3) All three properties (viscosity, density and surface tension) must be measured by one instrument in one station. (4) Sample range: the instrument must work both for highly pigmented, opaque and viscous paints and for transparent, low-viscosity liquids down to the viscosity of water. (5) Automation compatibility: the cups must be loadable and unloadable by a robot arm, and the instrument must provide a documented software interface (API) allowing DTU’s workflow software to start measurements and retrieve results without manual steps.

## Original notice

https://ted.europa.eu/da/notice/-/detail/801966-2026
