TED805162-2026
Tender regarding S-train Spare Parts and Maintenance agreement
- Ordregiver
- DSB
- Oplyst værdi / estimat
- 175.000.000 DKK
- Frist
- —
- Publiceret
- 19.11.2026
- Leveringssted (NUTS)
- DK021, DNK
- Ordregivers adresseområde (NUTS)
- DK021
Dataposten opdateret . Datakilder, dækning og beregningsmetode.
Beskrivelse
DSB needs to enter into an agreement regarding spare parts and services connected to DSB's S-train fleet for the next 15 years. DSB is seeking a supplier to deliver • S-train OEM parts, including SIBAS and Traction Spare Parts • Repair services • Replacement Parts and Software (Re-engineered Parts and New Products) • Obsolescence management The full technical specifications for the above-mentioned services and parts can be found in Appendix 1 and Subappendix 1.A. The full list of spare parts can be found in Appendix 2. Appendix 2 specifies which parts are required to be delivered as Spare parts (tab 1-3). Appendix 2 also specifies which parts are required to be repaired and/or re-engineered (tab 4-5), and which parts are required to be attempted repaired or re-engineered (tab 6) based on whether the Spare parts are expected to be partially or fully obsolete. Appendix 2 (tab 7) lists which services are to be offered, cf. Appendix 1, including repair and re-engineering services. All remaining tender documents, including the full contract draft with appendixes and evaluation methods, will be made available after tenderes have confirmed interest. The contract will include clauses regarding • Quality Management System • Price regulation based on indexation, as well as extraordinary circumstances (hardship) if prices of materials and shipping increase drastically . • DSB’s Ethical Guidelines (Code of Conduct) • Railway Safety • Warranty (24 months for all parts, excluding repaired rotables, which will have a 12 month warranty) • Penalty for delays • Suppliers insurance for liability, covering no less than DKK 50 mill per occurrence and in the annual aggregate. • DSB’s right to audit Siemens is the original equipment manufacturer (OEM) supplier of the Spare Parts listed in Appendix 2, including Traction & SIBAS parts for the S-trains. DSB has limited or no documentation of the OEM Traction & SIBAS parts and limited access and no rights to protocols and software in relation to the OEM, Traction & SIBAS parts. However, DSB will provide available access for inspection of both systems after prequalification. To avoid time-consuming and expensive safety processes the Spare Parts and components must be OEM or equivalent. The contract value for the entire duration of the contract, is estimated to be between DKK 125 mill. and DKK 175 mill.
Procedure og udbudsmateriale
Oplysninger fra bekendtgørelsen kan dække flere delkontrakter. Listerne nedenfor er separate uddrag; rækkefølgen kobler ikke et kriterium til en beskrivelse eller delkontrakt. Kontrollér krav, vægtning, frister, optioner og eventuelle rettelser i originalmaterialet.
Proceduretype (kildens kode)
- neg-w-call
Tildelingskriterier
- Price
- Delivery time
- Security of supply
Beskrivelser af tildelingskriterier
- Assessment of price will be based on the listed prices in Appendix 2 "Spare parts and Prices" for specific components, including the price of Spare Parts and related non-recurring costs (tab 1-3), the price of re-engineering (tab 4-5) and the hourly rate for repair services (tab 7).
- Quality will be assessed based on delivery time of OEM parts, including SIBAS and Traction Spare Parts. Repair services, Obsolescence management and development time of Replacement Parts and Software are excluded from this criterium.
- Quality will be assessed on the suppliers ability to provide evidence demonstrating the robustness and resilience of its supply chain. Positive weight will be given to offers that show measures implemented to mitigate supply chain risks and ensure continuity of supply. Documentation demonstrating compliance with this requirement may include, but is not limited to: * An overview of the supply chain structure for the relevant Spare Parts and services, including whether the Spare Parts and services are procured through distributors or agents, or directly from the manufacturer; * Declarations or other supporting documentation from relevant supply chain partners or manufacturers confirming the availability of the Spare Parts and services throughout the entire term of the Agreement; * Documentation of measures implemented to ensure continuity of supply, such as safety stock, alternative sources of supply and measures for managing obsolete or discontinued Spare Parts; * Supply chain risk assessments for the offered Spare Parts and services, identifying relevant risks, their likelihood and impact, and the measures implemented or planned to mitigate such risks.
Beskrivelser af krav til deltagelse
- As a condition for participating, a candidate must demonstrate its experience with an assignment that contains repairment of certain critical components, which have been placed in operational service in substantial quantities (i.e. excluding test scenarios). The critical components are as follows: * Zentralrechner (Central Processing Unit), 6FH9263, * Signalprozessor 56001,27MHz (Signal Processor), 6FH9265 and * I/O - Baugruppe (Input/Output Module), 6FH9288. The required experience must be demonstrated by a maximum of 3 references. A candidate must also demonstrate its experience with an assignment that contains delivery of SIBAS32 software and components that communicate with a CBTC-system. The required experience must be demonstrated by a maximum of 1 reference. The above-mentioned experience must be demonstrated by maximum 4 references all together.
- The candidate shall provide documentation demonstrating that a robust supply chain has been secured throughout the entire term of the Agreement for the representative sample of Spare Parts identified in Appendix 2, tab 1–3, and highlighted in yellow. Spare Parts not highlighted in yellow are excluded from this selection criterion. Documentation demonstrating compliance with this requirement may include, but is not limited to: * An overview of the supply chain structure for the relevant Spare Parts, including whether the Spare Parts are procured through distributors or agents, or directly from the manufacturer; * Declarations or other supporting documentation from relevant supply chain partners or manufacturers confirming the availability of the Spare Parts throughout the entire term of the Agreement; * Documentation of measures implemented to ensure continuity of supply, such as safety stock, alternative sources of supply and measures for managing obsolete or discontinued Spare Parts; * Supply chain risk assessments for the offered Spare Parts, identifying relevant risks, their likelihood and impact, and the measures implemented or planned to mitigate such risks.
- As a minimum requirement, a total annual turnover of at least DKK 125 million is required in the latest three annual reports/financial statements available. If the tenderer relies on the capacities of other entities, the turnover is to be calculated as the total turnover of the tenderer and such other entities in the latest three latest annual reports/financial statements available. For groups of operators (e.g., a consortium), the turnover is calculated as the total turnover of the operators in the latest three latest annual reports/financial statements available.
- The tenderer must have a EBIT margin of minimum 5%. As a minimum requirement, an EBIT-margin is required of at least 5 % in the latest three annual reports/financial statements available. The EBIT-margin is calculated by subtracting operating expenses and the cost of goods sold from total revenue. If the tenderer relies on the capacities of other entities, the EBIT-margin is calculated as the total revenue of the tenderer and such other entities subtracted by their total operating expenses and cost of goods sold. For groups of operators (e.g., a consortium), the EBIT-margin is calculated as the total revenue of the tenderer and such other entities subtracted by their total operating expenses and cost of goods sold, calculated as a percentage.
- As a minimum requirement, an equity ratio is required of at least 20 % in the latest three annual reports/financial statements available. The equity ratio is calculated as the operator’s total equity divided by the operator’s total assets, calculated as a percentage. The equity ratio is thus calculated as (total equity/total assets) x 100 = equity ratio. If the tenderer relies on the capacities of other entities, the equity ratio is calculated as the total equity of the tenderer and such other entities divided by their total assets, calculated as a percentage. For groups of operators (e.g., a consortium), the equity ratio is calculated as the total equity of the operators divided by their total assets, calculated as a percentage.
Oplyste spørgefrister
- 2026-11-29Z
Udbudsmateriale
Aflevering af tilbud
Andre bekendtgørelser i samme CPV-kategori
Nyeste bekendtgørelser med samme firecifrede CPV-kategori. Listen kan omfatte både åbne udbud og historik.
- Udbud af service smørepotter samt levering af smøremiddel, smørepotter og reservedele
Banedanmark
- Rammeaftale om støbegods og diverse køreledningskomponenter
Banedanmark
- Reparation og vedligeholdelse af Københavns Kommunes driftsmateriel
Københavns Kommune - Klima-, Miljø- og Teknikforvaltningen
- Kontrakt om drift af Banedanmarks svellefabrik
Banedanmark
- Frivillig markedsdialog vedrørende Odense Letbane Etape 2
Odense Letbane P/S
- Anskaffelse af mobil hjuldrejebænk
Nordjyske Jernbaner Hjulafdrejning A/S